Basic parameters and description of 3D printer "READY REBEL 1"
The printer was developed in the Czech Republic on the basis of approximately 9 years of experience with a solid and precise construction from aluminium profiles and blanks with a minimum of printed parts made of carbon material.
-Proven and reliable single-jet extruder with a maximum working temperature of 300 °C
-fully usable print space 235x235x300mm-0.4mm nozzle (can be fitted with 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9 and 1mm nozzle)
-heated printing table with a maximum working temperature of 130 ° C
-Possibility of printing from SD card, USB flash drive or via USB port from PC, or Repetier-Server, OctoPrint, AstroPrint etc.
-WiFi module for remote control of the printer
-5" touch LCD for easy and friendly operation
-9-point autoleveling with BL-Touch sensor measurement
-automatic alignment of Z-axis
-detection of filamentrunning low-integrated LEDlightingof print space
-removable magnetic printing plate with PEI surface or PET foil
-Possibility of printing common printing materials with a diameter of 1.75 mm, such as ABS. PLA, ASA, PETG, HIPS, Flex and materials with higher melting point up to 300 ° C
-32bit control board based on STM32 CPU with digitally controlled silent stepper motor drivers
-NEMA17 stepper motors well cooled thanks to the solid aluminium construction
-travels equipped with linear guide manufactured by HIWIN
-transmissions with quality toothed belts of GT2 profile with steel cord
-maximum print speed 200mm / s
-step resolution in Z axis 0.0025mm
-step resolution in X / Y axes 0.025mm